From 490aeb5a3fc727c76c531bdca08abb7d49139268 Mon Sep 17 00:00:00 2001 From: Crayon2000 Date: Mon, 11 Jan 2016 00:16:26 -0500 Subject: [PATCH] Updated Doxyfile to version 1.8.11. --- GRRLIB/GRRLIB/GRRLIB_bmf.c | 8 ++-- grrlib.doxygen | 82 +++++++++++++++++++++++++++++--------- 2 files changed, 68 insertions(+), 22 deletions(-) diff --git a/GRRLIB/GRRLIB/GRRLIB_bmf.c b/GRRLIB/GRRLIB/GRRLIB_bmf.c index 5cb5084..25a102c 100644 --- a/GRRLIB/GRRLIB/GRRLIB_bmf.c +++ b/GRRLIB/GRRLIB/GRRLIB_bmf.c @@ -87,7 +87,7 @@ void GRRLIB_FreeBMF (GRRLIB_bytemapFont *bmf) { u16 i; for (i=0; i<256; i++) { - if (bmf->charDef[i].data) { + if (bmf->charDef[i].data != NULL) { free(bmf->charDef[i].data); } } @@ -109,10 +109,12 @@ void GRRLIB_InitTileSet (GRRLIB_texImg *tex, const uint tilestart) { tex->tilew = tilew; tex->tileh = tileh; - if (tilew) // Avoid division by zero + if (tilew != 0) { // Avoid division by zero tex->nbtilew = tex->w / tilew; - if (tileh) // Avoid division by zero + } + if (tileh != 0) { // Avoid division by zero tex->nbtileh = tex->h / tileh; + } tex->tilestart = tilestart; tex->tiledtex = true; tex->ofnormaltexx = 1.0F / tex->nbtilew; diff --git a/grrlib.doxygen b/grrlib.doxygen index 289cc43..ef31b56 100644 --- a/grrlib.doxygen +++ b/grrlib.doxygen @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.11 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -226,7 +226,7 @@ SEPARATE_MEMBER_PAGES = NO # uses this value to replace tabs by spaces in code fragments. # Minimum value: 1, maximum value: 16, default value: 4. -TAB_SIZE = 8 +TAB_SIZE = 4 # This tag can be used to specify a number of aliases that act as commands in # the documentation. An alias has the form: @@ -353,6 +353,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -742,6 +749,12 @@ WARN_IF_DOC_ERROR = YES WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +778,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./GRRLIB/GRRLIB \ @@ -782,12 +795,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f, *.for, *.tcl, +# *.vhd, *.vhdl, *.ucf, *.qsf, *.as and *.js. FILE_PATTERNS = *.c \ *.cpp \ @@ -875,6 +893,10 @@ IMAGE_PATH = . # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +906,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -1001,7 +1027,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse-libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1161,8 +1187,9 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO @@ -1636,9 +1663,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1741,6 +1771,14 @@ LATEX_SOURCE_CODE = NO LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -2239,7 +2277,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2250,7 +2289,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2273,11 +2313,15 @@ GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = YES # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES.