Updated Doxyfile to version 1.8.11.

GRRLIB/GRRLIB/GRRLIB_bmf.c

@@ -87,7 +87,7 @@ void  GRRLIB_FreeBMF (GRRLIB_bytemapFont *bmf) {
     u16 i;
 
     for (i=0; i<256; i++) {
-        if (bmf->charDef[i].data) {
+        if (bmf->charDef[i].data != NULL) {
             free(bmf->charDef[i].data);
         }
     }
@@ -109,10 +109,12 @@ void  GRRLIB_InitTileSet (GRRLIB_texImg *tex,
                           const uint tilestart) {
     tex->tilew = tilew;
     tex->tileh = tileh;
-    if (tilew) // Avoid division by zero
+    if (tilew != 0) { // Avoid division by zero
         tex->nbtilew = tex->w / tilew;
-    if (tileh) // Avoid division by zero
+    }
+    if (tileh != 0) { // Avoid division by zero
         tex->nbtileh = tex->h / tileh;
+    }
     tex->tilestart = tilestart;
     tex->tiledtex = true;
     tex->ofnormaltexx = 1.0F / tex->nbtilew;

grrlib.doxygen

@@ -1,4 +1,4 @@
-# Doxyfile 1.8.9
+# Doxyfile 1.8.11
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -226,7 +226,7 @@ SEPARATE_MEMBER_PAGES  = NO
 # uses this value to replace tabs by spaces in code fragments.
 # Minimum value: 1, maximum value: 16, default value: 4.
 
-TAB_SIZE               = 8
+TAB_SIZE               = 4
 
 # This tag can be used to specify a number of aliases that act as commands in
 # the documentation. An alias has the form:
@@ -353,6 +353,13 @@ IDL_PROPERTY_SUPPORT   = YES
 
 DISTRIBUTE_GROUP_DOC   = NO
 
+# If one adds a struct or class to a group and this option is enabled, then also
+# any nested class or struct is added to the same group. By default this option
+# is disabled and one has to add nested compounds explicitly via \ingroup.
+# The default value is: NO.
+
+GROUP_NESTED_COMPOUNDS = NO
+
 # Set the SUBGROUPING tag to YES to allow class member groups of the same type
 # (for instance a group of public functions) to be put as a subgroup of that
 # type (e.g. under the Public Functions section). Set it to NO to prevent
@@ -742,6 +749,12 @@ WARN_IF_DOC_ERROR      = YES
 
 WARN_NO_PARAMDOC       = YES
 
+# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
+# a warning is encountered.
+# The default value is: NO.
+
+WARN_AS_ERROR          = NO
+
 # The WARN_FORMAT tag determines the format of the warning messages that doxygen
 # can produce. The string should contain the $file, $line, and $text tags, which
 # will be replaced by the file and line number from which the warning originated
@@ -765,7 +778,7 @@ WARN_LOGFILE           =
 # The INPUT tag is used to specify the files and/or directories that contain
 # documented source files. You may enter file names like myfile.cpp or
 # directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
+# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
 # Note: If this tag is empty the current directory is searched.
 
 INPUT                  = ./GRRLIB/GRRLIB \
@@ -782,12 +795,17 @@ INPUT_ENCODING         = UTF-8
 
 # If the value of the INPUT tag contains directories, you can use the
 # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
+# *.h) to filter out the source-files in the directories.
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
+#
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
+# Note that for custom extensions or not directly supported extensions you also
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
+# read by doxygen.
-# *.qsf, *.as and *.js.
+#
+# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
+# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
+# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
+# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f, *.for, *.tcl,
+# *.vhd, *.vhdl, *.ucf, *.qsf, *.as and *.js.
 
 FILE_PATTERNS          = *.c \
                          *.cpp \
@@ -875,6 +893,10 @@ IMAGE_PATH             = .
 # Note that the filter must not add or remove lines; it is applied before the
 # code is scanned, but not when the output code is generated. If lines are added
 # or removed, the anchors will not be placed correctly.
+#
+# Note that for custom extensions or not directly supported extensions you also
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
+# properly processed by doxygen.
 
 INPUT_FILTER           = 
 
@@ -884,6 +906,10 @@ INPUT_FILTER           =
 # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
 # filters are used. If the FILTER_PATTERNS tag is empty or if none of the
 # patterns match the file name, INPUT_FILTER is applied.
+#
+# Note that for custom extensions or not directly supported extensions you also
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
+# properly processed by doxygen.
 
 FILTER_PATTERNS        = 
 
@@ -1001,7 +1027,7 @@ VERBATIM_HEADERS       = NO
 # rich C++ code for which doxygen's built-in parser lacks the necessary type
 # information.
 # Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
+# generated with the -Duse-libclang=ON option for CMake.
 # The default value is: NO.
 
 CLANG_ASSISTED_PARSING = NO
@@ -1161,8 +1187,9 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
 # page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
+# to YES can help to show when doxygen was last run and thus if the
-# The default value is: YES.
+# documentation is up to date.
+# The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
 HTML_TIMESTAMP         = NO
@@ -1636,9 +1663,12 @@ COMPACT_LATEX          = NO
 PAPER_TYPE             = a4wide
 
 # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
+# that should be included in the LaTeX output. The package can be specified just
-# instance you can specify
+# by its name or with the correct syntax as to be used with the LaTeX
-# EXTRA_PACKAGES=times
+# \usepackage command. To get the times font for instance you can specify :
+# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}
+# To use the option intlimits with the amsmath package you can specify:
+# EXTRA_PACKAGES=[intlimits]{amsmath}
 # If left blank no extra packages will be included.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -1741,6 +1771,14 @@ LATEX_SOURCE_CODE      = NO
 
 LATEX_BIB_STYLE        = plain
 
+# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_TIMESTAMP        = NO
+
 #---------------------------------------------------------------------------
 # Configuration options related to the RTF output
 #---------------------------------------------------------------------------
@@ -2239,7 +2277,8 @@ INCLUDED_BY_GRAPH      = NO
 #
 # Note that enabling this option will significantly increase the time of a run.
 # So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
+# functions only using the \callgraph command. Disabling a call graph can be
+# accomplished by means of the command \hidecallgraph.
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2250,7 +2289,8 @@ CALL_GRAPH             = NO
 #
 # Note that enabling this option will significantly increase the time of a run.
 # So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
+# functions only using the \callergraph command. Disabling a caller graph can be
+# accomplished by means of the command \hidecallergraph.
 # The default value is: NO.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2273,11 +2313,15 @@ GRAPHICAL_HIERARCHY    = YES
 DIRECTORY_GRAPH        = YES
 
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
+# generated by dot. For an explanation of the image formats see the section
+# output formats in the documentation of the dot tool (Graphviz (see:
+# http://www.graphviz.org/)).
 # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
 # to make the SVG files visible in IE 9+ (other browsers do not have this
 # requirement).
-# Possible values are: png, jpg, gif and svg.
+# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo,
+# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
+# png:gdiplus:gdiplus.
 # The default value is: png.
 # This tag requires that the tag HAVE_DOT is set to YES.